High Presicion Lathe Machine C6241
Technical parameters:
| SERIES | ||||
| Model | C6241D×1000 | C6241D×1500 | C6246D×1000 | C6246D×1500 |
| Swing over bed | Φ410mm（16″） | Φ460mm(18″) | ||
| Swing over cross slide | Φ224mm(8 13/16″) | Φ274mm(10 3/4″) | ||
| Swing in gap(D×W) | 640mm×218mm | 690mm×218mm | ||
| Height of center | 205mm(8 5/64″) | 230mm(9 1/16″) | ||
| Distance between centers | 1015mm/1515mm | 1015mm/1515mm | ||
| Width of bed | 300mm(11 3/4″) | 300mm(11 3/4″) | ||
| Max. section of cutting tool | 25mm×25mm(1″×1″) | 25mm×25mm(1″×1″) | ||
| Total travel of cross slide | 290mm(11 3/8″) | 290mm(11 3/8″) | ||
| Total travel of top slide | 120mm(4 3/4″) | 120mm(4 3/4″) | ||
| Spindle bore | Φ82mm(3 1/4″) | Φ82mm(3 1/4″) | ||
| Spindle nose | D1-8 | D1-8 | ||
| Spindle morse taper in nose,in sleeve | ME90/M.T.#5 | ME90/M.T.#5 | ||
| Spindle speeds number | 12 | 12 | ||
| Spindle speeds range | 25-2000 R.P.M | 25-2000 R.P.M | ||
| Leadscrew diameter thread | 35mm(1 3/8″)×4 T.P.I or pitch 6mm | 35mm(1 3/8″)×4 T.P.I or pitch 6mm | ||
| Threads imperial pithches | 4-112(50 NOS) | 4-112(50 NOS) | ||
| Threads metric pithches | 0.25-7(24 NOS) | 0.25-7(24 NOS) | ||
| Diametral pitches DP/DP | 4-112(50 NOS) | 4-112(50 NOS) | ||
| Diametral pitches MP/MP | 0.25-14(34 NOS) | 0.25-14(34 NOS) | ||
| Longitudinal feeds(imperial/metric) | 0.0011″-0.0316″(50Nos)/0.01mm-0.286mm(50Nos) | 0.0011″-0.0316″(50Nos)/0.01mm-0.286mm(50Nos) | ||
| Cross feeds(imperial/metric) | 0.00024″-0.0068″(50Nos)/0.01mm-0.286mm(50Nos) | 0.00024″-0.0068″(50Nos)/0.01mm-0.286mm(50Nos) | ||
| Total travel of tailstock quill | 120mm(4 3/4″) | 120mm(4 3/4″) | ||
| Tails stock quill | Φ60mm(2 3/8″) | Φ60mm(2 3/8″) | ||
| Taper tailstock quill | M.T.#4 | M.T.#4 | ||
Machine Accessories:
| Optional equipment & accessories： | |
| ·Steady Rest | ·Leadscrew Guard |
| ·Follow Rest | ·Clutch for Feed Rod |
| ·Face plate | ·Taper Turning Attachment |
| ·Drill Chuck M.T.#4 | ·4 Jaw Independent Chuck & Back Plate |
| ·Rolling Centres | ·The Main Motor Stepless Speed Regulation |
| ·Quick Change Tool post | ·Digital Readout(3 Axis) |
| ·Digital Readout(2 Axis) | ·Foot Brake System |
| ·Coolant System | ·Localizer |
| ·Work Light | ·Chuck Cover |
Question & answer about this machine
- Question：
Answer： - Question：
Answer: - Question：
Answer: - Question：
Answer: - Question：
Answer:
