How to maintain the milling machine operation best

Milling machine is a kind of important metal cutting tools, but by its design limits, it has a certain processing range, strictly according to its operation standard , not passing, you will find that milling machine was the useful machine tools, or a long service life of the machine tool: this chapter with emphasis on the operation of the milling machine specification, hope you can help workers safe operation of machine tool operation, improve the service life of machine tool:
1: It is strictly prohibited to use equipment milling machine operator overloading.
2: Before working, must check carefully according to the circuit checkpoint, and lubrication according to the lubrication chart.
3: More than eight hours again to start the parking equipment, should first low-speed rotation three to five minutes, after the various parts of the lubrication system unobstructed movement is normal, to begin to work again.
4: Security guards are not allowed to be removed, Not allowed to disassemble bit files with iron. Not allowed to leave midway.
5: Beam axis table and lifts in mobile preceded loosen the fastening screws, remove debris around, wipe the rails and oiled.
6: Fast or automatic feed should be adjusted in the limit range for all iron.
7: The work must always check the device, ministries functioning and lubrication. Such as running or poor lubrication should stop using it.
8: Milling countertops ban placed tools, card measuring tools and artifacts.
9: Adjust the automatic cycle automatically when the machine must be checked for correctness before driving cycle.
10: When milling work is completed put each handle in the non-operating position, the table in the middle position, lift and cut off the power supply falls below.