Milling Machine Best Place to Buy – DXMC
Universal milling machine maintenance procedures on a regular basis
A. Appearance:
1. Scrub and each corner milling machine appearance, remove dust pollution, yellow robe black unlined upper garment, light lacquer see grey iron.
2. Unpick and wash the cover, the realization of inside and outside clean, and supplement the screw, nut, handle, handball.
3. Repair the scraping guideway, the hair of workbench face, stain, lubrication protection in a timely manner.
B. Endmill, spindle box:
1. Try to scrub the visible part of the spindle box, remove dirt, oil, and check the oil in the cabinet, change or add new oil, oil well and oil in place.
2. Scrub vertical milling head appearance and “cone hole no oil pollution and crapping cone hole of burr, mark.
C. Knee type milling machine:
1. Cleaning lifting platform and two layers of guide rail surface dust, grease, crapping burr, and impressions
Timely lubrication.
2.Check the plug iron and workbench guide clearance to moderate.
3.Remove dust, oil pollution in trapezoidal groove.
D. Ram, tool rod cover, reducer:
1.Wash the ram, bar set, remove grease and grime.
2.Scrub reducer, check tool rod, practice “taper.
E. The lubrication system:
1. Check the wash hand qin oil pump, oil tubing, oil hole, oil cup, window, oil, oil pool, achieve neat tubing cleaning, oil flow and oil the bright eye-catching, oil window.
2. Cleaning felt, soft and dust resistance performance is good.
F. Cooling system.
1. Check the scrub cooling pumps, filters, cooling pipe, pipe flow is firm and coolant cleaner.
2. Wipe clean the cooling groove, grime is realized.
Seven. Accessories: check the scrub, sorting, achieve clean and necessary after lubrication, arrange the press to put.
G. Electric
1. The cases of external dust cleaning wipes motors, electrical appliances, wash with detergent spray dust electrical box inside.
2. Cleaning inspection, electrical wiring, rational layout, strong cohesion, safe and reliable.
H. Will maintain to solve it or not, the main problems in the documentation, as the basis of the next maintenance and schedule maintenance.
I. The toolkit to wipe clean inside and outside, will all of its workers, folders, measuring tool to wipe them one by one, and, according to the principle of convenient take put, avoid knock against classification layered, neatly placed in the toolkit.
There are other problems? Contact our support team:
Related posts