1-1.Check the switch is on or not.
1.2.Check the work piece is clamp or not.
1-3.The lubricating oil of the rail meet the requirements or not.
2-1.Press the green starting button to make the spindle run.
2-2.Press the red starting button to make the spindle stop.
3-1.Press the button and cut off the power when unusual circumstances are happened during the operation.
3-2.Stop and check when automatic feeding of universal milling machine is not working.
4.instructions of universal milling machine：
4-1.Clamp work piece securely to the table.
4-2.It must be stopped when the work pieces are operated.
4-3.Head and hand should not approach the Cutting surface when Cutting, and must move the cutter when Take off the work pieces.
4-4.Don’t sop when feed , penetration of a cutting tool should not be too hard or change the speed suddenly.
4-5.When taking off the cutter the table should mat pieces of wood , holding the cutter table is banned.
4-6.Hair brush is only used when clean the iron filings.
5-1.Iron filings on the rail and the table should be cleaned after the work every day.
5-2.Check the oilleveler and oil capacity of the oil bath.