ZX6350c worktable can be longitudinal and lateral movement, the spindle vertical layout, usually in the table type, the machine head can lift up and down. ZX6350C can drilling, milling, boring, grinding, tapping and so on. ZX6350C is cutting machine tools with many kinds of function. The spindle box can turn 90 ° around in the vertical plane, the machine table can be turning around in the plane of the 45 °, Worktable can be longitudinal automatic knife.
Video and more deatils about zx6350c
ZX6350C drilling and milling machine is suitable for all kinds of small and medium-sized parts processing, especially in non-ferrous metal materials; Plastic; Nylon cutting, it has a simple structure, the advantages of flexible operation, widely used in single piece or a batch of mechanical manufacturing; Instrument industry; Building decoration and the replacement unit.
Simple faults and ruled out
1.ZX6350C drilling and milling machine motor not rotating , check the wiring is correct, the power supply have electricity.
2.Drilling and milling machine spindle radial runout, abnormal sound, have a fever phenomenon: check whether the spindle is loose, the locking nut to elastic proper adjustment of the spindle assembly.
3.Drilling and milling machine, shake: check the motor plate and a dry lock nut and screw is loose, the nose, bearing is clamped on the post, adjust the locking parts to press firmly.
4.Drilling and milling machine spindle lift block and no longer phenomenon, to check whether there is iron spindle sleeve and gear shaft attaches sundry, whether spring fatigue is flabby, clean up the iron filings sundry, oil, spring of consistence.
5.Drilling and milling machine lifting sliding seat lift instability, have sound, table is not stable. Check the bevel gear with place for scrap iron, Angle iron is loose, clean up the iron filings sundry. Oil, spring of consistence.
6.Drilling and milling machine, the gearbox has abnormal sound: stop the engine, speed is in place, is short of oil.
Read the article is boring? Didn’t find the answer? Contact our support team!